Electric Multi-Turn Actuator

February 06, 2024

Model NO.: CKD10

Trademark: Yangzhou Hengchun

Transport Package: Wooden Case

Specification: CE, ISO, ATEX, API, SIL2

Origin: China

HS Code: 9032

Model NO.: CKD10

Trademark: Yangzhou Hengchun

Transport Package: Wooden Case

Specification: CE, ISO, ATEX, API, SIL2

Origin: China

HS Code: 9032

Torque from:100 to 3000N.m
Yangzhou Hengchun was founded in 1994. The registered capital was 10 million dollars, total assets of 25 million dollars.
Our company manufacture CKD series intelligent actuator which can be used in gas&oil company, power plants,metallurgy industry, chemical industry and water treament.
We are now have the top class products quality in China.
In the aspect of oil, our products have been used in more than 300 projects with Petrochina, Sinopec, Sinochem and CNOOC.
In the aspect of power plants, our products are the main supplier of the top 5 power plants in over 200 projects

We knew how to made good products and we believe customers' satisfaction is the first thing.

Technical Parameters
Working environments	Temperature: -30'C~+70'C(can be customized to -45'C~+85'C) Relatively humidity: 95%(25'C) Pressure: 86kPa~106kPa
Power Supply	Single phase: 220V 50Hz Three phase:380V 50Hz Tolerance: Single phase Voltage(-15%/+10%) Three phase Voltage(±10%) Frequency(±5%), harmonic content (<5%), Direct Current (±10%)
Insulation resistance	1) Resistance between input terminal and case should be more than 20M . 2) Resistance between input terminal and power supply terminal should be more than 50M . 3) Resistance between power supply terminal and case should be more than 50M .
The motor insulation level	Level F(Level H is selectable)
Protection level	IP68(underwater 20M\96hours)
Anti-explosion level	EXD IIBT4\EXD IICT4

On-Off Type
Start frequency	650 times per hour
Designed lifetime	Minimum maintenance-free time:30,000 times
Working form	Short time working type, rated run time will be 15mins(customized to 30mins)

Regulated Type
Start Frequency	1200 times per hour
Designed lifetime	No less than times
Working form	Intermittent periodic-type, minimum rated load sustained rate is 25%
Basic parameters	Basic error: ≤ ±0.1% Hysteresis: ≤ 0.5% Dead zone: 0.1%~9.9% continuously adjustable Damping characteristic: undamped
Input and output signal	Analogue input 4-20mADC, input impedance ≤ 250 ; Analogue output4-20mADC, load resistance ≥ 750 ; Linear error ≤ 0.5%; Supply voltage: 24VDC provided by internal actuator; Actuator with a build-in servo amplifier; Input and output signal channel take optoelectronic isolation ; Passive junction capacity: 250V/5A AC; 30V/5A DC.

Technical Parameters
Working environments	Temperature: -30'C~+70'C(can be customized to -45'C~+85'C) Relatively humidity: 95%(25'C) Pressure: 86kPa~106kPa
Power Supply	Single phase: 220V 50Hz Three phase:380V 50Hz Tolerance: Single phase Voltage(-15%/+10%) Three phase Voltage(±10%) Frequency(±5%), harmonic content (<5%), Direct Current (±10%)
Insulation resistance	1) Resistance between input terminal and case should be more than 20M . 2) Resistance between input terminal and power supply terminal should be more than 50M . 3) Resistance between power supply terminal and case should be more than 50M .
The motor insulation level	Level F(Level H is selectable)
Protection level	IP68(underwater 20M\96hours)
Anti-explosion level	EXD IIBT4\EXD IICT4

On-Off Type
Start frequency	650 times per hour
Designed lifetime	Minimum maintenance-free time:30,000 times
Working form	Short time working type, rated run time will be 15mins(customized to 30mins)

Regulated Type
Start Frequency	1200 times per hour
Designed lifetime	No less than times
Working form	Intermittent periodic-type, minimum rated load sustained rate is 25%
Basic parameters	Basic error: ≤ ±0.1% Hysteresis: ≤ 0.5% Dead zone: 0.1%~9.9% continuously adjustable Damping characteristic: undamped
Input and output signal	Analogue input 4-20mADC, input impedance ≤ 250 ; Analogue output4-20mADC, load resistance ≥ 750 ; Linear error ≤ 0.5%; Supply voltage: 24VDC provided by internal actuator; Actuator with a build-in servo amplifier; Input and output signal channel take optoelectronic isolation ; Passive junction capacity: 250V/5A AC; 30V/5A DC.